Are you searching for a method to increase the safety of your own home? Are you looking out for an clever doorbell that can allow you to control your entrance door regardless of the place you’re? You could now relaxation simple realizing that the Ring Doorbell is the reply to all of your queries. This text will stroll you thru the method of establishing your Ring Doorbell step-by-step, guaranteeing that you’ve a stress-free expertise.
Earlier than we begin, be sure you have the next instruments and supplies available: a drill, a screwdriver, a degree, a hammer, a pencil, and a tape measure. To put in your Ring Doorbell efficiently, additionally, you will want the next: a Ring Doorbell, a mounting bracket, a doorbell transformer, doorbell wires, and a screwdriver. After getting collected the entire crucial provides, you possibly can start establishing your Ring Doorbell.
Armed with the mandatory instruments and supplies, you are now able to dive into the set up course of. Don’t be concerned, we’ll break it down into manageable steps so you possibly can take pleasure in peace of thoughts realizing you have secured your own home’s entry level.
Find out how to Set up Ring Doorbell
Earlier than you begin the set up, be sure you collect all the mandatory instruments and supplies, together with the Ring Doorbell, mounting bracket, doorbell transformer, doorbell wires, drill, screwdriver, degree, hammer, pencil, and tape measure.
- Flip off energy to doorbell.
- Take away current doorbell.
- Set up mounting bracket.
- Join doorbell wires.
- Mount Ring Doorbell.
- Degree and safe Ring Doorbell.
- Restore energy to doorbell.
- Check Ring Doorbell.
After getting put in your Ring Doorbell, obtain the Ring app and comply with the on-screen directions to finish the setup course of. You’ll be able to then use the app to regulate your Ring Doorbell and obtain notifications when somebody rings your doorbell or triggers the movement sensor.
Flip off energy to doorbell.
Earlier than you start putting in your Ring Doorbell, it’s important to show off the ability to your current doorbell. It will stop any electrical shocks and guarantee which you can work safely.
-
Find your doorbell breaker.
That is often situated in your house’s electrical panel. The doorbell breaker is often labeled “Doorbell” or “Chime.”
-
Flip off the doorbell breaker.
After getting discovered the doorbell breaker, flip it to the “Off” place. It will lower off energy to your doorbell.
-
Check the doorbell.
Press the doorbell button to be sure that it’s not working. If the doorbell nonetheless rings, then you haven’t efficiently turned off the ability. Verify the breaker once more and be sure that it’s within the “Off” place.
-
Take away the quilt out of your doorbell chime.
After getting confirmed that the ability is off, you possibly can take away the quilt out of your doorbell chime. It will expose the doorbell wires.
Now that you’ve turned off the ability to your doorbell, you possibly can safely proceed with the set up of your Ring Doorbell. Bear in mind to at all times comply with the directions offered within the Ring Doorbell person guide.
Take away current doorbell.
After getting turned off the ability to your doorbell, you possibly can proceed with eradicating the prevailing doorbell. This course of will range relying on the kind of doorbell you have got.
-
Take away the doorbell button.
The doorbell button is often held in place by one or two screws. Use a screwdriver to take away the screws after which gently pry the doorbell button off the wall.
-
Disconnect the doorbell wires.
After getting eliminated the doorbell button, you will notice two wires related to the again of the button. These are the doorbell wires. Use a pair of pliers to twist the wire nuts counterclockwise after which pull the wires aside.
-
Take away the doorbell chime.
The doorbell chime is often situated inside your own home, close to the entrance door. Take away the quilt from the chime after which disconnect the wires from the chime terminals. As soon as the wires are disconnected, you possibly can take away the chime from the wall.
-
Patch the holes.
After getting eliminated the doorbell button and chime, you’ll be left with two holes in your wall. You’ll be able to patch these holes with spackling compound or caulk.
Now that you’ve eliminated the prevailing doorbell, you’re prepared to put in your Ring Doorbell. Be sure to comply with the directions offered within the Ring Doorbell person guide.
Set up mounting bracket.
The mounting bracket is what is going to maintain your Ring Doorbell in place. It is very important set up the mounting bracket accurately, in order that your Ring Doorbell is degree and safe.
-
Select a location for the mounting bracket.
One of the best location for the mounting bracket is subsequent to your entrance door, at a peak of about 4 toes from the bottom. Ensure that the placement you select is degree and that there are not any obstructions, equivalent to timber or shrubs, that can block the view of the Ring Doorbell.
-
Mark the placement of the mounting holes.
Use a pencil to mark the placement of the 2 mounting holes on the wall. Ensure that the marks are degree.
-
Drill the mounting holes.
Use a drill to drill two holes on the marks you made within the earlier step. The holes needs to be deep sufficient to accommodate the anchors that got here with the Ring Doorbell.
-
Insert the anchors.
Insert the anchors into the holes you simply drilled. Faucet the anchors in with a hammer till they’re flush with the wall.
-
Screw the mounting bracket to the wall.
Use the screws that got here with the Ring Doorbell to screw the mounting bracket to the wall. Ensure that the mounting bracket is degree and safe.
Now that you’ve put in the mounting bracket, you’re prepared to attach the doorbell wires and mount the Ring Doorbell.
Join doorbell wires.
After getting put in the mounting bracket, that you must join the doorbell wires to the Ring Doorbell. The Ring Doorbell has two terminals, labeled “Entrance” and “Rear.” The entrance terminal is for the wire that comes out of your doorbell button, and the rear terminal is for the wire that goes to your doorbell chime.
To attach the doorbell wires, comply with these steps:
-
Strip the ends of the doorbell wires.
Use a wire stripper to take away about 1/2 inch of insulation from the ends of the doorbell wires. -
Twist the ends of the doorbell wires collectively.
Twist the ends of the 2 doorbell wires collectively tightly. -
Insert the twisted wires into the terminals on the Ring Doorbell.
Insert the twisted wires into the “Entrance” and “Rear” terminals on the Ring Doorbell. Ensure that the wires are inserted all the way in which into the terminals and that they’re making good contact. -
Tighten the terminal screws.
Use a screwdriver to tighten the terminal screws till the doorbell wires are safe.
Now that you’ve related the doorbell wires, you’re able to mount the Ring Doorbell to the mounting bracket.
Be aware: If you’re putting in a Ring Doorbell Professional, additionally, you will want to attach the ability adapter to the Ring Doorbell Professional. The facility adapter plugs into an outlet close to your doorbell.
Mount Ring Doorbell.
Now that you’ve related the doorbell wires, you’re able to mount the Ring Doorbell to the mounting bracket.
-
Align the Ring Doorbell with the mounting bracket.
Place the Ring Doorbell over the mounting bracket in order that the screw holes on the Ring Doorbell line up with the screw holes on the mounting bracket.
-
Insert the screws.
Insert the screws that got here with the Ring Doorbell into the screw holes. Ensure that the screws are tight and that the Ring Doorbell is safe.
-
Degree the Ring Doorbell.
Use a degree to be sure that the Ring Doorbell is degree. If the Ring Doorbell will not be degree, loosen the screws and regulate the place of the Ring Doorbell till it’s degree.
-
Tighten the screws.
As soon as the Ring Doorbell is degree, tighten the screws till they’re cosy.
Now that you’ve mounted the Ring Doorbell, you possibly can restore energy to the doorbell and check the Ring Doorbell.
Degree and safe Ring Doorbell.
After getting mounted the Ring Doorbell to the mounting bracket, you will need to degree and safe it.
-
Use a degree to test if the Ring Doorbell is degree.
Place a degree on prime of the Ring Doorbell. If the bubble within the degree is centered, then the Ring Doorbell is degree. If the bubble will not be centered, then that you must regulate the place of the Ring Doorbell till it’s degree.
-
Tighten the screws that safe the Ring Doorbell to the mounting bracket.
Use a screwdriver to tighten the screws that safe the Ring Doorbell to the mounting bracket. Ensure that the screws are tight and that the Ring Doorbell is safe.
-
Apply silicone sealant across the edges of the Ring Doorbell.
It will assist to weatherproof the Ring Doorbell and stop water harm. Use a caulk gun to use a skinny bead of silicone sealant across the edges of the Ring Doorbell.
-
Permit the silicone sealant to dry utterly.
Earlier than you check the Ring Doorbell, permit the silicone sealant to dry utterly. This may increasingly take a number of hours or in a single day.
After getting leveled and secured the Ring Doorbell, you possibly can restore energy to the doorbell and check the Ring Doorbell.
Restore energy to doorbell.
After getting put in the Ring Doorbell and examined it, you possibly can restore energy to the doorbell.
-
Activate the doorbell breaker.
Find the doorbell breaker in your house’s electrical panel. Flip the breaker to the “On” place. It will restore energy to the doorbell.
-
Check the Ring Doorbell.
Press the doorbell button to be sure that the Ring Doorbell is working correctly. The Ring Doorbell ought to mild up and it’s best to hear a chime inside your own home.
-
Obtain the Ring app.
If you have not already achieved so, obtain the Ring app from the App Retailer or Google Play Retailer. Create an account and comply with the on-screen directions to attach your Ring Doorbell to your Wi-Fi community.
-
Arrange your Ring Doorbell.
As soon as your Ring Doorbell is related to your Wi-Fi community, you should utilize the Ring app to arrange your Ring Doorbell. This consists of setting your movement detection settings, privateness settings, and notification settings.
Now that you’ve restored energy to the doorbell and arrange your Ring Doorbell, you can begin utilizing it to observe your own home and reply the door from anyplace.
Check Ring Doorbell.
After getting restored energy to the doorbell and related it to your Wi-Fi community, it’s best to check the Ring Doorbell to be sure that it’s working correctly.
-
Press the doorbell button.
The Ring Doorbell ought to mild up and it’s best to hear a chime inside your own home.
-
Open the Ring app.
In your smartphone, open the Ring app and faucet on the Ring Doorbell that you just wish to check.
-
View the dwell video feed.
It’s best to now have the ability to see a dwell video feed from the Ring Doorbell. Should you do not see a dwell video feed, test to be sure that the Ring Doorbell is related to your Wi-Fi community and that the Ring app is updated.
-
Check the movement detection.
Stroll in entrance of the Ring Doorbell and see if the movement sensor is triggered. The Ring Doorbell ought to ship you a notification in your smartphone when the movement sensor is triggered.
If you’re having issues testing your Ring Doorbell, you possibly can contact Ring help for assist.
FAQ
Have extra questions on putting in your Ring Doorbell? Try these incessantly requested questions and solutions.
Query 1: What instruments do I would like to put in my Ring Doorbell?
Reply 1: You will have a drill, a screwdriver, a degree, a hammer, a pencil, and a tape measure. Additionally, you will want the Ring Doorbell, a mounting bracket, a doorbell transformer, doorbell wires, and a screwdriver.
Query 2: Do I would like to show off the ability to my doorbell earlier than I set up it?
Reply 2: Sure, it’s best to at all times flip off the ability to your doorbell prior to installing it. It will stop any electrical shocks and guarantee which you can work safely.
Query 3: How do I join the doorbell wires to the Ring Doorbell?
Reply 3: The Ring Doorbell has two terminals, labeled “Entrance” and “Rear.” The entrance terminal is for the wire that comes out of your doorbell button, and the rear terminal is for the wire that goes to your doorbell chime. Twist the ends of the doorbell wires collectively and insert them into the terminals on the Ring Doorbell.
Query 4: How do I mount the Ring Doorbell to the wall?
Reply 4: First, set up the mounting bracket on the wall. Then, align the Ring Doorbell with the mounting bracket and insert the screws. Ensure that the Ring Doorbell is degree and safe.
Query 5: How do I check my Ring Doorbell?
Reply 5: After getting put in the Ring Doorbell, activate the ability to the doorbell and press the doorbell button. The Ring Doorbell ought to mild up and it’s best to hear a chime inside your own home. It’s also possible to check the movement detection by strolling in entrance of the Ring Doorbell.
Query 6: What do I do if I am having issues putting in my Ring Doorbell?
Reply 6: If you’re having issues putting in your Ring Doorbell, you possibly can contact Ring help for assist.
Query 7: Can I set up my Ring Doorbell myself?
Reply 7: Sure, you possibly can set up your Ring Doorbell your self. Nonetheless, in case you are not snug working with electrical wiring, chances are you’ll wish to rent an expert to put in it for you.
Closing Paragraph for FAQ: These are only a few of probably the most incessantly requested questions on putting in a Ring Doorbell. When you’ve got every other questions, please seek the advice of the Ring Doorbell person guide or contact Ring help.
Now that you know the way to put in a Ring Doorbell, listed below are a number of suggestions that can assist you get probably the most out of your new doorbell.
Ideas
Listed below are a number of suggestions that can assist you get probably the most out of your new Ring Doorbell:
Tip 1: Select the proper location in your Ring Doorbell.
One of the best location in your Ring Doorbell is subsequent to your entrance door, at a peak of about 4 toes from the bottom. Ensure that the placement you select is degree and that there are not any obstructions, equivalent to timber or shrubs, that can block the view of the Ring Doorbell.
Tip 2: Use a robust Wi-Fi sign.
The Ring Doorbell requires a robust Wi-Fi sign to perform correctly. When you’ve got a weak Wi-Fi sign within the space the place you wish to set up the Ring Doorbell, chances are you’ll want to make use of a Wi-Fi extender or booster to enhance the sign power.
Tip 3: Arrange movement detection and notifications.
The Ring Doorbell has a built-in movement sensor that can be utilized to set off notifications in your smartphone. You’ll be able to customise the movement detection settings to solely obtain notifications for sure forms of movement, equivalent to folks or automobiles.
Tip 4: Join your Ring Doorbell to different sensible dwelling gadgets.
The Ring Doorbell could be related to different sensible dwelling gadgets, equivalent to sensible lights and sensible locks. This lets you create automated actions, equivalent to turning on the lights when somebody rings the doorbell or unlocking the door whenever you reply the doorbell out of your smartphone.
Closing Paragraph for Ideas: By following the following tips, you may get probably the most out of your new Ring Doorbell and revel in the entire advantages that it has to supply.
Now that you know the way to put in and use your Ring Doorbell, you possibly can benefit from the peace of thoughts that comes with realizing which you can monitor your own home and reply the door from anyplace.
Conclusion
Putting in a Ring Doorbell is a good way to enhance the safety of your own home and control your property. By following the steps on this information, you possibly can simply set up your Ring Doorbell your self and begin having fun with the entire advantages that it has to supply.
Abstract of Primary Factors:
- Flip off the ability to your doorbell earlier than you start set up.
- Take away your current doorbell.
- Set up the mounting bracket.
- Join the doorbell wires to the Ring Doorbell.
- Mount the Ring Doorbell to the mounting bracket.
- Degree and safe the Ring Doorbell.
- Restore energy to the doorbell.
- Check the Ring Doorbell.
Closing Message: Together with your Ring Doorbell put in, now you can take pleasure in peace of thoughts realizing which you can monitor your own home and reply the door from anyplace. It’s also possible to use the Ring Doorbell to attach with different sensible dwelling gadgets and create automated actions to make your own home much more safe and handy.
